
Owner’s Code Guide
How to Change the Code on a Master Lock Box
Call DC Locksmiths first if you cannot open your own box. For a Master Lock box reset, use the steps below only when you know the current combination and can open the key compartment.
- Open 24 hours a day, 7 days a week
- Licensed and insured
- 1-year warranty on parts and labor
Check Your Master Lock Box Before Resetting Its Code
These steps cover common Master Lock wall-mounted key boxes with an internal reset lever. Keep the compartment open while you change the combination; never try to reset a box you cannot open with the current combination.
- The current combination — Enter the code you already use to open the box. The reset steps begin with the compartment open, so do not force the door if the combination does not work.
- A clear view of the reset control — Look inside the open compartment for the reset lever. The steps below apply to a lever that moves between a reset position and its normal position.
- A new combination you can remember — Choose a code you can recall without writing it on or beside the box. Check that each dial can reach every number in the new combination.
- Your box’s model information — Identify the model before moving a control. For models with a different reset mechanism, use the model-specific instructions on Master Lock support rather than guessing at the sequence.
Reset the Code on a Master Lock Box With These Steps
Use this sequence only on a Master Lock box with the internal reset lever described above. Keep the box open through the test so you can correct the setting without locking yourself out.
- Open the compartment with your current code — Set the dials to the combination you currently use, then open the compartment door. Make sure the door is fully open before touching the reset lever.
- Find the reset lever inside — Locate the lever in the open compartment and check that it is not blocked by keys or other items. Do not force it; first clear anything that prevents it from moving freely.
- Move the lever into its reset position — Push the lever to the left and down, toward the center of the compartment, and hold it there. On this lever-style design, the lever stays in the reset position while you set the new combination.
- Set the new combination on the dials — Turn each dial until the number you chose lines up at the opening’s reference mark. Check every dial in order before releasing the lever.
- Return the lever to its original position — Push the lever up and to the right, back into its normal position. Confirm that it has returned fully before you close the compartment.
- Test the new code while the box is still open — Turn the dials away from the new combination, then set them back to it and operate the door. The new code should release the door; test it again before closing the box and putting it back into use.
Need help now? (771) 244-2901
Why a Master Lock Box Code Reset Can Fail
A failed test usually means the lever or dials did not complete the reset sequence. Keep the compartment open while you check these points.
The lever did not return fully
If it remains between positions, the new combination may not have been saved. With the door still open, move the lever back to its normal position without forcing it, then test the code.
A dial is between numbers
A number that does not line up clearly with the reference mark can leave the combination unclear. Turn each dial until its chosen number is centered at the mark, then try the sequence again.
The reset control differs from these steps
Some models use a different reset mechanism or sequence. Stop before pressing or turning an unfamiliar control and check the instructions for the exact model.
The lever sticks or appears damaged
A lever that will not move normally may be obstructed or worn. Do not apply extra force, which can damage the reset mechanism or leave the box unusable.
When a Master Lock Box Needs a Locksmith
Call a professional if you do not know the current combination, cannot open your own box, the reset lever is damaged, or a correctly set code still will not operate the door. Do not try to bypass the lock; a locksmith can assess the box and the access problem. DC Locksmiths provides mobile service in Washington, DC and nearby Maryland and Virginia, within about 20 miles of downtown. You can reach us through our contact page or learn more about our Master Lock locksmith service.
Need help now? (771) 244-2901
Frequently asked questions
Do I need to open the Master Lock box before changing its code?
Yes. For the internal-lever reset method, open the compartment with the current combination before moving the reset lever. Keep the door open until you have tested the new code.
What should I do if I forgot the current combination?
The reset lever is inside the compartment, so this procedure is for a box you can already open. Check the model’s support information or contact a locksmith; do not force the box or try to defeat its lock.
Why does my new combination not open the box?
Check that every dial was centered on its number and that the reset lever returned fully to its normal position. If the door is still open, set the combination again and test it before closing the box.
Can I use these steps on every Master Lock box?
No. These steps describe common wall-mounted key boxes with an internal reset lever, and other models can use different controls. Identify your model and use its instructions if the mechanism or lever movement does not match.
Need Help With Your Lock Box?
For a box you cannot open or reset, contact DC Locksmiths for mobile locksmith service in Washington, DC and nearby Maryland and Virginia.