Skip to content
Open 24/7 Washington & nearby
DC Locksmiths logo Español (771) 244-2901
Key cutting machine, programmer cables and AutoProPAD box on the diamond-plate bench of a locksmith work vehicle

Keypad Programming Guide

Kwikset SmartCode Programming: How to Program a Keypad

Call DC Locksmiths at (771) 244-2901 for help with Kwikset SmartCode programming if your keypad will not accept a code. For compatible models, you can add a code yourself while the door is open and you have the existing key.

  • Mobile locksmith service: we come to you
  • Open 24 hours a day, 7 days a week
  • Licensed and insured
  • 1-year warranty on parts and labor

What to Check Before Kwikset SmartCode Programming

These steps cover common button-programmed SmartCode models such as the 909 and 910. Keep the door open throughout setup so a rejected code cannot leave you locked out. For other models or keypad layouts, find the exact model and use the Kwikset support manuals for its programming sequence.

  • The existing key — Keep the key with you and confirm it operates the lock before changing keypad settings. It gives you a way to enter if the new code does not work.
  • A code you can enter reliably — Choose a new 4–8 digit user code for the 909 and 910. Avoid a sequence that is easy to guess, and make sure you can enter it accurately on the keypad.
  • Access to the interior Program button — The programming button is on the interior side of these models. Locate it before beginning; you should not need to remove the lock from the door.
  • A clear door opening — Keep the door open and make sure the bolt can move without hitting the frame. This lets you test the code without risking a lockout.

Steps to Add a User Code to a Kwikset SmartCode 909 or 910

On these button-programmed models, adding a user code uses the interior Program button and the exterior Lock button. Follow the sequence below without closing the door.

  1. Keep the door open — Leave the door open for the entire setup and test. Keep the existing key within reach.
  2. Press the interior Program button once — Press and release the Program button on the interior assembly. Do not hold it down for this user-code sequence.
  3. Enter the new user code — On the exterior keypad, enter the code you chose. For the 909 and 910, the code must contain 4–8 digits.
  4. Press the exterior Lock button once — Press the button marked with the lock symbol to submit the code. A successful entry is indicated by one green flash and one beep.
  5. Test the new code with the door still open — Enter the new code on the keypad and check that the lock accepts it and the bolt moves freely. Do not close the door until the keypad responds as expected.
  6. Repeat the sequence for another code, if needed — For these models, repeat the same steps to add another user code; they support up to eight user codes. Test each code with the door open before relying on it.

Need help now? (771) 244-2901

Why a Kwikset SmartCode May Reject a New Code

Watch the keypad response and check the model before repeating the sequence. Several setup problems look alike at first.

The model uses a different procedure

SmartCode keypads do not all use the same layout or programming sequence. Check the model number on the lock and use the matching instructions rather than repeating steps for a 909 or 910.

The button sequence was interrupted

A missed press or an extra press can prevent the code from saving. Start again from the Program button and follow the order once, without rushing between entries.

The code does not meet the model’s requirements

For the 909 and 910, use 4–8 digits. If the keypad gives an error response, try a different code that fits that range.

The bolt meets resistance

A bolt that binds against the door frame may stop the lock from moving normally during a test. Leave the door open; if the bolt still will not move freely, the issue may need physical adjustment rather than another code entry.

When to Call a Locksmith About Your SmartCode Keypad

Call a professional if the keypad will not enter programming mode, the model-specific sequence does not work, or the bolt binds even with the door open. Do not close the door while the new code remains untested. DC Locksmiths provides mobile service and can come to you; see our Kwikset SmartCode keypad lock help or contact us to arrange service.

Need help now? (771) 244-2901

Frequently asked questions

Do these steps work for every Kwikset SmartCode keypad?

No. The button sequence here applies to common button-programmed models such as the SmartCode 909 and 910. Check the model number on your lock because other SmartCode models can use different controls or setup steps.

How many digits should a SmartCode 909 or 910 user code have?

Use 4–8 digits for a user code on these models. Choose a code you can enter consistently, then test it with the door open before using it as your regular entry code.

What should I do if the keypad flashes red and beeps?

On the 909 and 910, three red flashes and three beeps indicate the programming attempt did not succeed. Check that you entered the code in the right order and within the model’s digit range, then try again with the door open.

Should I test the new code after programming it?

Yes. Leave the door open, enter the new code, and confirm the lock accepts it and the bolt moves freely before closing the door. If it still fails after you check the model and repeat the sequence, call a locksmith rather than risking a lockout.

SmartCode Still Not Responding?

Call DC Locksmiths at (771) 244-2901. We provide mobile locksmith service and are open 24 hours a day, 7 days a week.

(771) 244-2901 Get a quote